Not using Act Id But Rather Somethin Else

[Snikers]

Hello!

I've ran into a problem and this is what it is!

I'm usng a Combo Box Editable and i've got some info in there when i drag and drop a Notepad File into it and i'm able to use, Getwintxt and Setwintxt perfectly fine setting my info where i want to ! BUT, in order for me to use Getwintxt and Setwintxt, i have to Focus on the Combo Box Editable using " Act Id " but my problem is that everytime that i have the Combo Box Editable Minimized, it always pops back up when " Act id " is used in my macro!

Hope you understand what i mean!

So, is there a solution to this so that i do not have to use " Act Id "! Like is there something that i can still use but does not disturb my box when it is minimized BUT still gets my info in the Combo Box Editable!

Thank You So Much.

[Gintaras]

works well here.
Function Dialog78

Code:

Copy      Help

\Dialog_Editor
function# hDlg message wParam lParam
if(hDlg) goto messages

str controls = "3"
str cb3
cb3="&ab[]cd"
if(!ShowDialog("Dialog78" &Dialog78 &controls)) ret

;BEGIN DIALOG
;0 "" 0x90C80A44 0x100 0 0 223 135 "Dialog"
;1 Button 0x54030001 0x4 120 116 48 14 "OK"
;2 Button 0x54030000 0x4 170 116 48 14 "Cancel"
;3 ComboBox 0x54230242 0x0 16 12 96 213 ""
;4 Button 0x54032000 0x0 34 36 54 14 "focus combo"
;5 Button 0x54032000 0x0 6 56 126 14 "get combo text without focusing it"
;6 Button 0x54032000 0x0 6 76 126 14 "get combo item 1 text"
;END DIALOG
;DIALOG EDITOR: "" 0x2030103 "" "" ""

ret
;messages
sel message
,case WM_INITDIALOG
,case WM_DESTROY
,case WM_COMMAND goto messages2
ret
;messages2
sel wParam
,case 4
,act id(3 hDlg)
,
,case 5
,out _s.getwintext(id(3 hDlg))
,
,case 6
,CB_GetItemText(id(3 hDlg) 1 _s); out _s
,
,case IDOK
,case IDCANCEL
ret 1

[Snikers]

OK this works fine for me but now what im trying to do is input what ever is in box a to box b but im not sure how, ive tryed some things but it wont work if i use, getwintxt and another thing, i was trying to make box b readonly but it seems that im not able to do that



Function Dialog78

Code:

Copy      Help

\Dialog_Editor
function# hDlg message wParam lParam
if(hDlg) goto messages

str controls = "3 7"
str cb3 lb7
cb3="&ab[]cd"
if(!ShowDialog("Dialog78" &Dialog78 &controls)) ret

;BEGIN DIALOG
;0 "" 0x90C80A44 0x100 0 0 223 135 "Dialog"
;1 Button 0x54030001 0x4 164 90 48 14 "OK"
;2 Button 0x54030000 0x4 164 114 48 14 "Cancel"
;4 Button 0x54032000 0x0 40 78 54 14 "focus combo"
;5 Button 0x54032000 0x0 6 96 126 14 "get combo text without focusing it"
;6 Button 0x54032000 0x0 6 116 126 14 "get combo item 1 text"
;3 ComboBox 0x54230641 0x0 8 22 96 48 ""
;7 ListBox 0x54230101 0x200 122 22 96 48 ""
;8 Static 0x54000000 0x0 32 6 48 12 "Box A"
;9 Static 0x54000000 0x0 142 6 48 12 "Box B"
;END DIALOG
;DIALOG EDITOR: "" 0x203000D "" "" ""

ret
;messages
sel message
,case WM_INITDIALOG
,case WM_DESTROY
,case WM_COMMAND goto messages2
ret
;messages2
sel wParam
,case 4
,act id(3 hDlg)
,
,case 5
,out _s.getwintext(id(3 hDlg))
,
,case 6
,CB_GetItemText(id(3 hDlg) 1 _s); out _s
,
,case IDOK
,case IDCANCEL
ret 1

[Gintaras]

Here begins Windows programming. You can find listbox control reference in the MSDN library on the internet. Look for message LB_ADDSTRING. QM also has a function LB_Add.