Parallel Port Trigger

[Gintaras]

Download from link 2 and register hwinterface.ocx in menu Tools -> Type Libraries.

Function dlg_parallel_port

Code:

Copy      Help

\Dialog_Editor
function# hDlg message wParam lParam
if(hDlg) goto messages

typelib HWINTERFACELib {BD6BB71B-5C9A-4FB3-877E-8B513D28B951} 1.0

str controls = "8 10"
str e8 e10
e8=255
e10="0x0378"
if(!ShowDialog("dlg_parallel_port" &dlg_parallel_port &controls)) ret

;BEGIN DIALOG
;0 "" 0x90C80A44 0x100 0 0 223 135 "Parallel Port"
;1 Button 0x54030001 0x4 120 116 48 14 "OK"
;2 Button 0x54030000 0x4 170 116 48 14 "Cancel"
;3 ActiveX 0x54030000 0x0 206 4 12 10 "HWINTERFACELib.Hwinterface {B9022892-EA92-4F94-8101-B9CDE30E667D}"
;6 Button 0x54032000 0x0 44 34 62 14 "send to output"
;7 Static 0x54000000 0x0 8 18 98 12 ""
;8 Edit 0x54030080 0x200 8 34 32 14 ""
;9 Static 0x54000000 0x0 10 78 34 12 "Port"
;10 Edit 0x54030080 0x200 46 76 32 14 ""
;5 Button 0x54020007 0x0 4 62 108 36 "Config"
;4 Button 0x54020007 0x0 4 4 106 50 "Input and output"
;END DIALOG
;DIALOG EDITOR: "" 0x2030002 "*" "" ""

ret
;messages
HWINTERFACELib.Hwinterface x._getcontrol(id(3 hDlg))
int port=val(_s.getwintext(id(10 hDlg)))

sel message
,case WM_INITDIALOG
,SetTimer hDlg 1 50 0
,
,case WM_TIMER
,sel wParam
,,case 1
,,_s=x.InPort(port)
,,_s-"input is: "
,,_s.setwintext(id(7 hDlg))
,
,case WM_DESTROY
,case WM_COMMAND goto messages2
ret
;messages2
sel wParam
,case 6
,_s.getwintext(id(8 hDlg))
,x.OutPort(port val(_s))
,
,case IDOK
,case IDCANCEL
ret 1