Dynamically create SysListView

[Kevin]

you almost have it

just need a couple more things

Function DynamicLV

Code:

Copy      Help

;/
function# str'text [flags];;optional .1 show dialog at caret position if possible. 0 or omitted show dialog at center of screen(default)
out
if(flags&1)
,int xx yy isCaret
,isCaret = GetCaretXY(xx yy)
str dd=
;BEGIN DIALOG
;0 "" 0x90080AC8 0x0 0 0 184 108 "Dialog"
;3 SysListView32 0x5403C04D 0x204 0 0 184 108 ""
;END DIALOG
;DIALOG EDITOR: "" 0x2040C00 "*" "" "" ""

int iii= ShowDialog(dd &sub.DlgProc 0)
ret iii

#sub DlgProc v
function# hDlg message wParam lParam

int hsys32=id(3 hDlg)
sel message
,case WM_INITDIALOG
,__Font- f.CreateNew(hsys32 "Microsoft YaHei Mono" 11) ;;change this
,f.SetDialogFont(hDlg "3")    
,int es=LVS_EX_FULLROWSELECT|LVS_EX_INFOTIP|LVS_EX_GRIDLINES
,SendMessage hsys32 LVM_SETEXTENDEDLISTVIEWSTYLE es es
,TO_LvAddCol hsys32 0 "" -90
,TO_LvAddCol hsys32 1 "" -10
;,Fill-in values to sys32
,int n=numlines(text)
,for int'i 0 n
,,_s.getl(text i)
,,TO_LvAdd hsys32 i 0 0 _s i+1
,RECT r.left=LVIR_BOUNDS; SendMessage(hsys32 LVM_GETITEMRECT 0 &r)
,int xy=SendMessage(hsys32 LVM_APPROXIMATEVIEWRECT n -1|-1)
,int width = xy & 0x0000FFFF
,int hh = xy>>16&0x0000FFFF
,siz width+4 hh hsys32
,siz width+11 hh-r.bottom+8 hDlg
,sub.LvSelect hsys32 0
,if(isCaret > 0) ;; if caret is found  and flag is 1 move dialog to caret
,,mov xx yy+25 hDlg
,case WM_DESTROY
,case WM_COMMAND goto messages2
,case WM_NOTIFY goto messages3    
ret
;messages2
sel wParam
,case IDOK
,int ii=SendDlgItemMessage(hDlg 3 LVM_GETNEXTITEM -1 LVNI_SELECTED)
,DT_EndDialog(hDlg ii)
,case IDCANCEL
,DT_EndDialog(hDlg 1000);;;return this to know dialog was closed  using alt+F4 or esc
ret 1
;messages3
NMHDR* nh=+lParam
sel nh.idFrom
,case 3
,sel nh.code
,,case LVN_KEYDOWN
,,NMLVKEYDOWN* lvk=+nh
,,for i 0 numlines(text)
,,,_s.getl(text i)
,,,if(_s[0] = lvk.wVKey)
,,,,DT_EndDialog(hDlg i)
,,,,break
,,case NM_DBLCLK;;on double left click of listview item
,,i=SendDlgItemMessage(hDlg 3 LVM_GETNEXTITEM -1 LVNI_SELECTED)
,,DT_EndDialog(hDlg i)

#sub LvSelect
function hlv item [flags] ;;flags: 1 don't deselect previous, 2 don't set focus, 4 ensure visible, 8 deselect

;Selects listview item.
;To select none, use item -1.
;To select all, use item -1 and flag 8.
;Note that listview controls with LVS_SINGLESEL style can have max 1 item selected.

LVITEMW li.stateMask=LVIS_FOCUSED|LVIS_SELECTED
if(item>=0)
,if(flags&9=0) SendMessage hlv LVM_SETITEMSTATE -1 &li
,if(flags&8=0) li.state=LVIS_SELECTED; if(flags&2=0) li.state|LVIS_FOCUSED
,SendMessage hlv LVM_SETITEMSTATE item &li
,if(flags&4) SendMessage hlv LVM_ENSUREVISIBLE item 0
else
,if(flags&8) li.state=LVIS_SELECTED
,SendMessage hlv LVM_SETITEMSTATE -1 &li

 
calling examples

Code:

Copy      Help

int i=DynamicLV(_s);;center of screen
int i=DynamicLV(_s 1);;below cursor